![background image](http://html1.mh-extra.com/html/daelim/daystar-vl125e/daystar-vl125e_service-manual_3160189200.webp)
15-11
Rear Wheel/Rear Brake/Suspension
Disassembly
Disassemble the rear sub fender.
Disassemble the chain slider.
Disassemble the rear fork pivot bearing.
Disassemble the dust seal and center collar.
Disassemble the pivot bush.
Inspect the center collar pivot bush for wear,
damage, and defect.
Check the dust seal for wear and damage.
Check the rear fork for wear and other
damage.
Inspect the rear pivot fork bearing for wear or
damage if necessary replaced.
Assembly
Apply grease to the center collar, pivot bush,
and install them to the rear fork.
Assemble the chain slider.
Coat the dust seal lips with grease, and install it.
Assemble the rear sub fender.
Assemble carefully not to bend or damage the
sides of the seal.
Installation
Install the rear fork and tighten the pivot bolt.
Torque: 4.5kgf-m
Install the following.
- Rear cushion
- Chain cover.
- Rear wheel
- R/L lower cover
!
CAUTION
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Center Color
Center Color
Center Color
Center Color
Center Color
Center Color
Center Color
Center Color
Center Color
Center Color
Center Color
Center Color
Center Color
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Chain Slider
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Summary of Contents for DAYSTAR VL125E
