D-Link DXS-1210 Series User Manual
39
Aging Time:
Enter the MAC address table’s aging time value. This value must be between 10 and 1000000
seconds. Entering 0 will disable MAC address aging. By default, this value is 300 seconds.
Aging Destination Hit:
Select to enable or disable the aging destination hit function.
Click the
Apply
button to save your settings.
After clicking the MAC Address Learning tab, the following page will appear.
Figure 4.61 – L2 Features > FDB > MAC Address Table Settings – MAC Address Learning
From Port / To Port:
Enter
the range of ports that will be used for this configuration.
State:
Select to enable or disable the MAC address learning function on the specified ports.
Click the
Apply
button to save your settings.
L2 Features > FDB > MAC Address Table
The
MAC Address Table
page allows you to view the entries listed in the MAC address table.
Figure 4.62 – L2 Features > FDB > MAC Address Table
Port:
Select
the port that will be used for this configuration.
VID (1-4094):
Enter
the VLAN ID that will be used for this configuration.
MAC Address:
Enter
the MAC address that will be used for this configuration
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Clear Dynamic by Port
button to clear the dynamic MAC address listed on the corresponding port.
Click the
Clear Dynamic by VLAN
button to clear the dynamic MAC address listed on the corresponding
VLAN.
Click the
Clear Dynamic by MAC
button to clear the dynamic MAC address entered.
Click the
Find
button to locate a specific entry based on the information entered.
