D-Link DXS-1210 Series User Manual
63
be flooded based on the VLAN domain. When selecting the
Forward All
option, all multicast packets will be
flooded based on the VLAN domain. When selecting the
Filter Unregistered
option, registered packets will
be forwarded based on the forwarding table and all unregistered multicast packets will be filtered.
Click the
Apply
button to save your settings.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
L2 Features > LLDP > LLDP Global Settings
Link Layer Discovery Protocol (LLDP) is and IEEE 802.1AB standards-compliant method for switches to
advertise themselves to neighbor devices, as well as to learn about neighbor LLDP devices. SNMP utilities
can learn the network topology by obtaining the MIB information for each LLDP device. The LLDP function is
enabled by default.
Figure 4.103 – L2 Features > LLDP > LLDP Global Settings
LLDP Global Settings:
LLDP State:
Select to enable or disable LLDP globally on the Switch. With this enabled, the Switch will
transmit receive and process LLDP packets.
LLDP Forward State:
Select
to enable or disable LLDP forward state. When the
LLDP State
is disabled and
LLDP Forward Sate
is enabled, the received LLDPDU packet will be forwarded.
LLDP Trap State:
Select
to enable or disable the LLDP trap state.
LLDP-MED Trap State:
Select
to enable or disable the LLDP-MED trap state.
Click the
Apply
button to save your settings.
LLDP-MED Configuration:
Fast Start Repeat Count (1-10):
Enter
the LLDP-MED fast start repeat count value. This value must be
between 1 and 10.
Click the
Apply
button to save your settings.
LLDP Configurations:
