D-Link DXS-1210-10TS User Manual Download Page 128

Page: 128 / 134

D-Link DXS-1210 Series User Manual

122

Figure 4.201 – Monitoring > Statistics > Counters

From Port / To Port:

Select the range of ports to be viewed.

Click the

Find

button to locate a specific entry based on the information entered.

Click the

Refresh

button to refresh the display table.

Click the

Clear

button to clear all the information for the specific ports.

Click the

Clear All

button to clear all the information in this table.

Click the

Show Detail

button to see the detail information of the specific port.

After clicking the

Show Detail

button, the following page will appear.

Figure 4.202 – Monitoring > Statistics > Counters – Show Detail

Click the

Back

button to return to the previous window.

Click the

Refresh

button to refresh the display table.

Monitoring > Mirror Settings

The Mirror Settings page allows you to view and configure the port mirroring feature.

Summary of Contents for DXS-1210-10TS







































































































































Search results

Summary of Contents for DXS-1210-10TS

Reviews:

Related manuals for DXS-1210-10TS

Brands by name

Popular brands

D-Link DXS-1210-10TS, User Manual

Search results

Summary of Contents for DXS-1210-10TS

Reviews:

Related manuals for DXS-1210-10TS

Brands by name

Popular brands