D-Link DXS-1210 Series User Manual
83
To define the IPv4 ACL:
Select
IPv4
and then click the
Next
button. Click the
IPv4 Address
,
Port
,
IPv4
DSCP
and
TCP Flag
tabs to display the following page:
Figure 4.140 – ACL > ACL Configuration Wizard – Create IPv4 ACL
Sequence No. (1-65535):
Select and enter the ACL rule number. This value must be between 1 and 65535.
Select
Auto Assign
to automatically generate an ACL rule number for this entry.
Protocol Type:
Select the protocol type option. Options to choose from are
TCP
,
UDP
,
ICMP
,
EIGRP
,
ESP
,
GRE
,
IGMP
,
OSPF
,
PIM
,
VRRP
,
IP-in-IP
,
PCP
,
Protocol ID
, and
None
.
After selecting
TCP
as the
Protocol Type
, Click the
IPv4 Address
,
Port, IPv4 DSCP
and
TCP Flag
tabs to
display the following page:
Figure 4.141 – ACL > ACL Configuration Wizard – Create IPv4 ACL-TCP
Source:
Select the source information. The values are
Any
,
Host
and
IP
.
Destination:
Select the destination information. The values are
Any
,
Host
and
IP
.
Source Port:
Select the source port value.
