D-Link DXS-1210 Series User Manual
85
Action:
Select the action for the rule. The values are
Permit
and
Deny
.
After selecting
ICMP
as the
Protocol Type
, click the
IPv4 Address
,
ICMP
and
IPv4 DSCP
tabs to display
the following page:
Figure 4.143 – ACL > ACL Configuration Wizard – Create IPv4 ACL-ICMP
Source:
Select the source information. The values are
Any
,
Host
and
IP
.
Destination:
Select the destination information. The values are
Any
,
Host
and
IP
.
IP Precedence:
Select the IP precedence value. Options to choose from are
0 (routine)
,
1 (priority)
,
2
(immediate)
,
3 (flash)
,
4 (flash-override)
,
5 (critical)
,
6 (internet)
, and
7 (network)
.
ToS:
Select the Type-of-Service (
ToS
) value that will be used. Options to choose from are
0 (normal)
,
1
(min-monetary-cost)
,
2 (max-reliability)
,
3
,
4 (max-throughput)
,
5
,
6
,
7
,
8 (min-delay)
,
9
,
10
,
11
,
12
,
13
,
14
, and
15
.
DSCP (0-63):
Select the DSCP value. And the range is between 0 and 63.
Specify ICMP Message Type:
Specify the ICMP message type.
ICMP Message Type (0-255):
When the
ICMP Message Type
is not selected, enter the ICMP Message
Type numerical value used. When the
ICMP Message Type
is selected, this numerical value will
automatically be entered.
Message Code (0-255):
When the
ICMP Message Type
is not selected, enter the Message Code numerical
value used. When the
ICMP Message Type
is selected, this numerical value will automatically be entered.
Time Range:
Enter the time range.
Action:
Specify the action for the rule. The values are Permit and Deny.
After selecting
EIGRP
as the
Protocol Type
, click the
IPv4 Address
and
IPv4 DSCP
tabs to display the
following page:
