D-Link DXS-1210-10TS User Manual Download Page 20

Page: 20 / 134

D-Link DXS-1210 Series User Manual

Figure 4.6 – Save Configuration

Destination:

Select the destination to save the configuration to.

Startup-config:

Check the box to enable the startup configuration function.

Click the

Apply

button to save your settings.

Tool Bar > Tool Menu

The Tool Menu offers global functions controls such as Reset, Reboot Device,

Configuration Backup and

Restore, Firmware Backup and Upgrade.

Figure 4.7 – Tool Menu

Firmware Information

Display the firmware for the 2 firmware images, including the image that has been booted and the image that
is selected for the next reboot.

Figure 4.8 – Tool Menu > Firmware Information

Configuration Information

Display information for the Switch configuration. This includes the configuration that has been loaded and the
configuration that is selected for the next reboot.

Figure 4.9 – Tool Menu > Configuration Information

Summary of Contents for DXS-1210-10TS







































































































































Search results

Summary of Contents for DXS-1210-10TS

Reviews:

Related manuals for DXS-1210-10TS

Brands by name

Popular brands

D-Link DXS-1210-10TS, User Manual

Search results

Summary of Contents for DXS-1210-10TS

Reviews:

Related manuals for DXS-1210-10TS

Brands by name

Popular brands