D-Link DXS-1210 Series User Manual
99
Figure 4.157– ACL > ACL Configuration Wizard – Create IPv6 ACL-ICMP
Source:
Select the source information. The values are
Any
,
Host
and
IP
.
Destination:
Select the destination information. The values are
Any
,
Host
and
IP
.
DSCP (0-63):
Select the DSCP value. And the range is between 0 and 63.
Flow Label (0-1048575):
Enter
the flow label value. This value must be between 0 and 1048575.
Specify ICMP Message Type:
Select
the ICMP message type used.
ICMP Message
Type
(0-255):
When the
ICMP Message Type
is not selected, enter the ICMP Message
Type numerical value. When the
ICMP Message Type
is selected, this numerical value will automatically be
entered.
Message Code (0-255):
When the
ICMP Message Type
is not selected, enter the Message Code numerical
value. When the
ICMP Message Type
is selected, this numerical value will automatically be entered.
Time Range:
Enter the time range.
Action:
Select the action for the rule. The values are
Permit
and
Deny
.
After selecting
Protocol ID
as the
Protocol Type,
click the
IPv6 Address
,
IPv6 DSCP
and
Flow Label
tabs
to display the following page
:
