D-Link DXS-1210 Series User Manual
101
After selecting
PCP
as the
Protocol Type,
click the
IPv6 Address
,
IPv6 DSCP
and
Flow Label
tabs to
display the following page
:
Figure 4.160 – ACL > ACL Configuration Wizard – Create IPv6 ACL-PCP
Source:
Select the source information. The values are
Any
,
Host
and
IP
.
Destination:
Select the destination information. The values are
Any
,
Host
and
IP
.
DSCP (0-63):
Enter the DSCP value. And the range is between 0 and 63.
Flow Label (0-1048575):
Enter
the flow label value. This value must be between 0 and 1048575.
Time Range:
Enter the time range.
Action:
Select the action for the rule. The values are
Permit
and
Deny
.
After selecting
SCTP
as the
Protocol Type,
click the
IPv6 Address
,
IPv6 DSCP
and
Flow Label
tabs to
display the following page:
