D-Link DXS-1210 Series User Manual
31
Figure 4.45 – Management > SNMP > SNMP Community Table Settings
Key Type:
Select
the key type for the SNMP community. Select either
Plain
Text
or
Encrypted
.
Community Name:
Select
an alphanumeric string of up to 32 characters that is used to identify members of
an SNMP community. This string is used like a password to give remote SNMP managers access to MIB
objects in the Switch’s SNMP agent.
View Name:
Enter
an alphanumeric string of up to 32 characters that is used to identify the group of MIB
objects that a remote SNMP manager is allowed access to on the Switch. The view name must exist in the
SNMP View Table.
Access Right:
Select the user’s access rights from the drop-down menu:
Read Only
- SNMP community members can read the contents of the MIBs on the Switch.
Read Write
- SNMP community members can read and write the contents of the MIBs on the Switch.
IP Access-List Name:
Enter
the name of the standard access list to control access to the SNMP agent
using this community string.
Click
Add
to a new entry based on the information entered or
Delete
to remove the specified entry.
Management > SNMP > SNMP Group Table Settings
The SNMP Group page allows you to manage SNMP Groups. Access to SNMP OIDs and security policies
can be controlled on a per group basis
.
Figure 4.46 – Management > SNMP > SNMP Group Table Settings
Group Name:
Enter a SNMP group name of up to 32 characters.
User-based Security Model:
Select the SNMP security model.
SNMPv1 -
SNMPv1 does not support any security features.
