D-Link DXS-1210 Series User Manual
57
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings
The IGMP snooping Groups Settings page allows you to configure and view the IGMP snooping static group,
and view IGMP snooping group.
Figure 4.93 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Group Settings
VID (1-4094):
Enter the VLAN ID.
Group Address:
Enter the IP multicast group address.
From Port / To Port:
Select the range of ports to be configured.
Click the
Apply
button to save your settings.
Click the
Delete
button to remove the specified entry.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Find All
button to view all the entries.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
The fields that can be configured for
IGMP Snooping Groups Table
are described below:
IGMP Snooping Group Table:
VID (1-4094):
Specify the VLAN ID.
Group Address:
Click the radio button and enter an IP multicast group address.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Find All
button to view all the entries.
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Mrouter Settings
The IGMP Snooping Mrouter Settings page allows you to configure interfaces as multicast router ports or
ports that cannot be multicast router ports on the Switch.
