D-Link DXS-1210 Series User Manual
33
User Name:
Enter a SNMP user name of up to 32 characters.
Group Name:
Enter the SNMP group of the SNMP user.
SNMP Version:
Select the SNMP version of the user. The options to choose are
v1
,
v2c
and
v3
.
SNMP V3 Encryption:
When selecting
v3
in the
SNMP Version
drop-down list, this option is available.
Options to choose from are
None
,
Password
, and
Key
.
Auth-Protocol by Password:
Select either
MD5
or
SHA
to be the authentication protocol. Enter a password
for SNMPv3 encryption in the right column.
MD5
– Select to use the HMAC-MD5-96 authentication level. This field will require the user to enter
a password.
SHA
- Select that the HMAC-SHA authentication protocol will be used. This field will require the user
to enter a password.
Priv-Protocol by Password:
Select either
None
or
DES56
and then enter a password for SNMPv3
encryption in the right column.
None
– Select to not use any authorization.
DES56
– Select to use DES 56-bit encryption, based on the CBC-DES (DES-56) standard. This field
will require you to enter a password.
Auth-Protocol by Key:
Select either
MD5
or
SHA
to be the authentication protocol. Enter a key for SNMPv3
encryption in the right column.
MD5
– Select to use the HMAC-MD5-96 authentication level. This field will require the user to enter
a key.
SHA
– Select to use the HMAC-SHA authentication protocol. This field will require you to enter a key.
Priv-Protocol by Key:
Select either
None
or
DES56
and then enter a password for SNMPv3 encryption in
the right column.
None
– Select to not use any authorization.
DES56
– Select to use DES 56-bit encryption, based on the CBC-DES (DES-56) standard. This field
will require the user to enter a key.
IP Address-List Name:
Enter the standard IP Access Control List (ACL) to associate with the user.
Click
Add
to create a new SNMP user account or click
Delete
to remove any existing data.
Management > SNMP > SNMP Host Table Settings
The SNMP Host Table Settings page allows you to configure the SNMP trap recipients.
Figure 4.49 – Management > SNMP > SNMP Host Table Settings
Host IPv4/IPv6 Address:
Select IPv4 or IPv6 and specify the IP address of SNMP management host.
User-based Security Model:
Specify the SNMP version to be used to the management host. The options
are
SNMPv1
,
SNMPv2C
and
SNMPv3
.
Security Level:
When selecting
SNMPv3
in the
User-based Security Model
drop-down list, this option is
available.
NoAuthNoPriv
– Select to have no authorization and no encryption of packets sent between the
Switch and a remote SNMP manager.
