D-Link DXS-1210 Series User Manual
103
Source:
Select the source information. The values are
Any
,
Host
and
IP
.
Destination:
Select the destination information. The values are
Any
,
Host
and
IP
.
DSCP (0-63):
Enter the DSCP value. And the range is between 0 and 63.
Flow Label (0-1048575):
Enter
the flow label value. This value must be between 0 and 1048575.
Time Range:
Enter the time range.
Action:
Select the action for the rule. The values are
Permit
and
Deny
.
Click the
Back
button to return to the previous window.
Click the
Next
button to continue.
After clicking the
Next
button, the following page will appear.
Figure 4.163 – ACL > ACL Configuration Wizard – Create IPv6 ACL-Next
From Port / To Port:
Select the range of ports to be configured.
Direction:
Select either
In
or
Out
.
Click the
Back
button to return to the previous window.
Click the
Apply
button to save your settings.
ACL > ACL Access List
The ACL Access List page allows you to view and configure the access list settings.
Figure 4.164 – ACL > ACL Access List
ACL Type:
Select the ACL profile type to find. Options to choose from are
All
,
IP ACL
,
IPv6 ACL
,
MAC
ACL
, and
Expert ACL
.
ID (1-14999):
Select and enter ACL ID. The range is between 1 and 14999.
ACL Name:
Select and enter ACL name. The name can be up to 32 characters long.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Add ACL
button to create a new ACL profile.
Click the
Clear All Counter
button to clear all the counter information displayed.
Click the
Clear Counter
button to clear the counter information for the rule displayed.
Click the
Add Rule
button to create an ACL rule for the ACL profile selected.
