9.5
Replace mains fuse
Introduction
A blown fuse might indicate the existence of another problem in the instrument. If a
replacement fuse blows, do not replace it. Contact your Cytiva representative.
Precautions
WARNING
Always disconnect power to ÄKTA flux s before replacing fuses.
Replace the mains fuse
Note:
A small screwdriver is used to remove the mains fuses.
Follow the steps below to replace the mains fuse.
The mains fuses are placed in a fuse drawer under the power supply input at the rear
side of ÄKTA flux s.
Step
Action
1
Disconnect the power supply.
9 Maintenance
9.5 Replace mains fuse
ÄKTA flux s Operating Instructions 29046893 AG
177
