Web Manager Wizard
97
Configuring Network Interfaces—Wizard
8.
Click the “Next” button.
•
If failover is disabled, clicking the “Next” button brings up the first of
two screens for configuring the primary and secondary Ethernet ports.
Note:
Connecting the secondary Ethernet port to a separate network and
assigning a separate IP address is optional, so you can skip the screen for
configuring the secondary Ethernet port, if desired.
•
If failover is enabled, clicking the “Next” button brings up a screen
for configuring the failover device.
Note:
Whether you are configuring failover or configuring the primary and
secondary Ethernet ports separately, the fields are the same.
9.
If desired, enable DHCP on any of the network interface configuration
screens, by clicking the “DHCP” checkbox.
10.
If desired, configure the selected Ethernet port to use a static IP address
by performing the following steps.
a.
Disable DHCP by making sure the “DHCP” checkbox is not checked.
b.
Enter or modify the IP address in the “IP address” field.
c.
Enter or modify the netmask in the “Network mask” field.
d.
Enter or modify the IP address for a network gateway in the
“Gateway IP” field.
e.
Enter or modify the maximum transmission unit value for the
Ethernet port in the “MTU” field.
f.
Enter or modify the broadcast IP address for the Ethernet port in the
Broadcast IP field.
11.
If failover is disabled, and the current Ethernet port is the primary
Ethernet port, click the “Next” button and perform Step 10 again on the
secondary Ethernet port configuration screen for the secondary Ethernet
port, if desired.
12.
Click “Save and apply changes.”
13.
Click the “Next” button, if desired, to go to the next Wizard step.
Summary of Contents for AlterPath OnBoard
