manualshive.com logo in svg

Cyclades AlterPath OnBoard, Administrator'S Manual

The Cyclades AlterPath OnBoard Administrator's Manual is a comprehensive guide to setting up and managing your device. It covers everything from installation to troubleshooting, and is available for free download from our website. Ensure you have the necessary resources at your fingertips to make the most out of your equipment.

Share
Download
background image

Configuring an Alternate Help File Location

 

 

156

AlterPath OnBoard Administrator’s Guide

5.

If configuring network boot, do the following steps.

a.

Accept or change the filename of the network boot program in the 
“Network boot file name” field. 

The file must be in the 

/tftpboot

 directory on the TFTP server 

specified in Step b.

b.

Enter the IP address of the TFTP server in the “Server’s IP address” 
field.

c.

Select a console speed from the “Console speed” pull-down menu.

6.

Click “Save and apply changes.” 

Configuring an Alternate Help File Location

When an administrative user selects the Help option under Settings, a screen 
appears like the one shown in the following figure. 

Figure 5-37:

Settings 

→

 Help Screen

The Help button on the Web Manager looks for its help files in the location 
specified here. By default, the OnBoard help is located at the Cyclades web 
site at the specified URL: 

www.cyclades.com/online-help/onb/

v_1.0.0

. 

If an OnBoard administrator downloads the help files from Cyclades onto 
another web server that is available to users, and then an administrative user 
can change the URL in the “URL Prefix” field to point to the Help button to 
the new location for the files.   

Summary of Contents for AlterPath OnBoard













































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AlterPath OnBoard

D-Link Air DCS-1000W Setting-Up Manual preview
Air DCS-1000W
Brand: D-Link Pages: 13
D-Link DSL-500 Quick Start Manual preview
DSL-500
Brand: D-Link Pages: 11
D-Link DHP?P309AV Setup Manual preview
DHP?P309AV
Brand: D-Link Pages: 8
D-Link AirPlus DWL-810 Quick Installation Manual preview
AirPlus DWL-810
Brand: D-Link Pages: 8
D-Link DFE-690TXD Quick Install Manual preview
DFE-690TXD
Brand: D-Link Pages: 12
D-Link DHP-601AV Quick Installation Manual preview
DHP-601AV
Brand: D-Link Pages: 84
IBM 3708 Description preview
3708
Brand: IBM Pages: 342
Paradyne Hotwire 5446 Notice preview
Hotwire 5446
Brand: Paradyne Pages: 2
Paradyne Hotwire 6381 Installation Instructions Manual preview
Hotwire 6381
Brand: Paradyne Pages: 20
Paradyne Hotwire 6381 Upgrade Instructions preview
Hotwire 6381
Brand: Paradyne Pages: 2
Zhone Hotwire 6381 Quick Installation Instructions preview
Hotwire 6381
Brand: Zhone Pages: 2
Commell LS-570 User Manual preview
LS-570
Brand: Commell Pages: 58
Profile LS901-E1 Instruction Manual preview
LS901-E1
Brand: Profile Pages: 6
IBA Com-L2B-4-8 Manual preview
Com-L2B-4-8
Brand: IBA Pages: 29
Dahua DHI-NVR2104-P-4KS2 Quick Start Manual preview
DHI-NVR2104-P-4KS2
Brand: Dahua Pages: 23
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Brand: BSD Networks Pages: 7
Lanner ICS-P570 User Manual preview
ICS-P570
Brand: Lanner Pages: 63
Radicom WiFiHU2S-a/c Preliminary Designer’S Manual preview
WiFiHU2S-a/c
Brand: Radicom Pages: 27

Brands by name

Popular brands

Load more brands