Cyclades AlterPath OnBoard, Administrator'S Manual

Page: 137 / 460

Web Manager Wizard 101
Configuring Private Subnets and Virtual Addresses—Wizard
Since the broadcast address in the example is 192.168.0.255 (by convention )
and the OnBoard’s address is 192.168.0.254, the administrator can assign an
IP address out of the remaining available IP addresses between 192.168.0.1
and 192.168.0.253 when configuring a connected device.
Multiple private subnets may be needed if IP addresses are already assigned to
connected devices’ Ethernet ports and if the IP addresses are not in the same
range.
T
To Add a Private Subnet—Wizard
1. Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager” on page 75, if needed.
2. Click the “Wizard” button.
3. Click the “Subnets” option in the left menu bar.
4. Click the “Add Subnet” button.
5. Enter a meaningful name for the private subnet in the “Private subnet
name” field.
6. Enter an IP address within the private subnet’s network address range in
the “Onboard side IP address” field.
7. Enter a netmask for the subnet in the “Subnet netmask” field.
8. Click OK.
9. Click “Save and apply changes.”
10. Click the “Next” button, if desired, to go to the next Wizard step.
T
To Edit a Private Subnet—Wizard
1. Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager” on page 75, if needed.
2. Click the “Wizard” button.
3. Click the “Subnets” option in the left menu bar.
4. Click the “Edit” button for the entry for the private subnet you want to
change.