Cyclades AlterPath OnBoard, Administrator'S Manual

Page: 337 / 460

Using the cycli Utility 301
Summary of How to Configure the Top Level Parameters
sensoralarm
• Use the
add sensoralarm
command to
configure a sensor alarm (
add
sensoralarm
alarm_ID)
• Use the
set sensoralarm
command to
configure the parameters (
set
sensoralarm
alarm_ID <Tab><Tab>
shows the parameters to set).
service
Use the
set service
command to enable or
disable any service (
set service
<Tab><Tab> shows the services to enable or
disable by specifying
enable yes
or
enable no
for each).
snmpd [access | com2sec | group
| user | view]
• Use the
add snmpd
command to add
access, com2sec, group, user, and view (
add
snmpd [access | com2sec | group
| user | view]
• Use the
set snmpd
command to configure
the parameters (
set snmpd
parameter Tab
Tab shows the parameters to set).
sshd
Use the
set sshd
command to enable or
disable SSHD (
set sshd
<Tab><Tab>
shows the parameters to set).
syslog
Use the
set syslog
command to specify a
syslog server (
set syslog
<Tab><Tab>
shows the parameters to set).
timezone
Use the
set timezone
command to specify
the timezone (
set timezone
<Tab><Tab>
shows the parameters to set)
Table 9-2: Top Level
cycli
Parameters With Set or Add Commands (Sheet 7 of 8)
Parameter Command