manualshive.com logo in svg

Cyclades AlterPath OnBoard, Administrator'S Manual

The Cyclades AlterPath OnBoard Administrator's Manual is a comprehensive guide to setting up and managing your device. It covers everything from installation to troubleshooting, and is available for free download from our website. Ensure you have the necessary resources at your fingertips to make the most out of your equipment.

Share
Download
background image

Introduction 

267

 

 

Options Under “Mgmt”

T

To Back Up Configuration Files 

1.

Bring up the Web Manager and log in.

See “To Log Into the Web Manager” on page 75, if needed.

2.

Go to Mgmt 

→

 Backup/restore.

3.

Click the “Save” button to back up the current state of the configuration 
files.

4.

Click the “Save and apply changes” button.

T

To Restore Backed-up Configuration Files 

1.

Bring up the Web Manager and log in.

See “To Log Into the Web Manager” on page 75, if needed.

2.

Go to Mgmt 

→

 Backup/restore.

3.

Click the “Restore” button to restore any previously-saved configuration 
files.

4.

Click the “Save and apply changes” button.

Upgrading OnBoard Firmware (Operating System 

Kernel, Configuration Files, and Applications) 

When an administrative user goes to the Mgmt 

→

 Firmware upgrade screen, 

the screen shown in the following figure appears.

Figure 8-7:

Mgmt 

→

 Firmware Upgrade Screen

Summary of Contents for AlterPath OnBoard













































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AlterPath OnBoard

D-Link Express Ethernetwork DI-704P Quick Install Manual preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 17
Hal Communications RS2100 Instruction Manual preview
RS2100
Brand: Hal Communications Pages: 25
Samsung SWC-E100 Quick Start Manual preview
SWC-E100
Brand: Samsung Pages: 2
Samsung iDCS 500 Manual preview
iDCS 500
Brand: Samsung Pages: 31
Samsung DDR3 Product Manual preview
DDR3
Brand: Samsung Pages: 15
E-Lins H900 Series User Manual preview
H900 Series
Brand: E-Lins Pages: 59
E-Lins H750 Quick Start Manual preview
H750
Brand: E-Lins Pages: 11
E-Lins H700 Series Quick Start Manual preview
H700 Series
Brand: E-Lins Pages: 9
E-Lins H685 Series Quick Start preview
H685 Series
Brand: E-Lins Pages: 5
e-Line Technology Network Video Recorders User Manual preview
Network Video Recorders
Brand: e-Line Technology Pages: 34
H3C SR6600 SPE-FWM Vxlan Command Reference preview
SR6600 SPE-FWM
Brand: H3C Pages: 45
H3C SR6600 SPE-FWM Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 80
H3C MSR 5600 Configuration Manual preview
MSR 5600
Brand: H3C Pages: 46
H3C MSR 5600 Comware 7 Vxlan Command Reference preview
MSR 5600
Brand: H3C Pages: 45
H3C MSR 3600 Quick Start preview
MSR 3600
Brand: H3C Pages: 4
H3C SR6600 SPE-FWM Fundamentals Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 184
Icidu NI-707533 Manual Manual preview
NI-707533
Brand: Icidu Pages: 10
IEI Technology PCIE-Q470 Quick Installation Manual preview
PCIE-Q470
Brand: IEI Technology Pages: 19

Brands by name

Popular brands

Load more brands