manualshive.com logo in svg

Cyclades AlterPath OnBoard, Administrator'S Manual

Share
Download
Cyclades AlterPath OnBoard Administrator'S Manual Download Page 416

Network Boot Options and Caveats

 

 

380

AlterPath OnBoard Administrator’s Guide

4.

Enter the 

net_boot

 command.

5.

Log in as root after boot completes.

6.

Run the 

create_cf

 command with the 

--doformat

 option. 

Note:

Be aware that the 

--doformat

 option erases the flash memory and 

installs the boot image into the image1 area. See “Options for the create_cf 
Command” on page 381 for other options.

7.

The following text appears when the operation completes. 

8.

Configure the OnBoard to boot from flash.

See “To Boot from an Alternate Image in U-Boot Monitor Mode” on page 
377, if needed.

9.

Enter the 

reboot

 command.

T

To Restore the OnBoard Configuration Files 

to the Last Saved Version

This procedure assumes that you or a previous administrator has previously 
run the 

saveconf

 command, or clicked the “Save” button on the Web 

Manager Mgmt  

→

 Backup/restore screen after making changes to the 

configuration. This procedure restores the configuration files to the state they 
were in when they were last backed up.

1.

If you are logged into the Web Manager as an administrative user, click 
the “Load” button on the Web Manager Mgmt  

→

 Backup/restore screen.

=> 

net_boot 

[root@OnBoard root]# 

create_cf --doformat --factory_default

Creation of image 

N

 completed.

...

#

 reboot

Summary of Contents for AlterPath OnBoard













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands