Cyclades AlterPath OnBoard, Administrator'S Manual

Page: 309 / 460

Introduction 273
Options Under “Mgmt”
b. Specify the location of an image that resides on a TFTP server.
See “To Configure OnBoard Boot” on page 155 if needed.
c. Go to Step 4.
4. If the OnBoard is currently running an image from RAMDISK after a
network boot and you want to write the image into the flash memory, do
the following steps.
a. Select a destination for the image from the “Image destination” pull-
down menu.
b. Choose whether to use the current configuration or the factory-default
configuration from the “Configuration to install” menu.
c. Click the “Upgrade Now” button.
5. To upgrade using an image from an ftp server, do the following steps:
a. Enter the IP address or DNS name of the ftp server in the “FTP site”
field.
b. Enter the username for the ftp site in the “Username” field.
c. Enter the password required for accessing the ftp site in the
“Password” field.
d. Enter the pathname of the software image file on the ftp server in the
“Image file” field.
e. Click the “Upgrade Now” button.
6. When the download completes, go to Mgmt
→
Restart and restart the
OnBoard.
7. If you want to restore the configuration from the last backed-up copy,
perform the following steps:
a. Go to the Mgmt
→
Backup/restore screen.
b. Click the “Load” button.