Configuring Private Subnets and Virtual Addresses—Wizard
102
AlterPath OnBoard Administrator’s Guide
5.
Accept or change the name of the private subnet in the “Private subnet
name” field.
6.
Accept or change the IP address in the “Onboard side IP address” field.
7.
Accept or change the netmask for the subnet in the “Subnet netmask”
field.
8.
Click OK.
9.
Click “Save and apply changes.”
10.
Click the “Next” button, if desired, to go to the next Wizard step.
Configuring a Virtual Network
A virtual network based on Destination Network Address Translation (DNAT)
must be defined in the following cases:
•
When multiple
subnets
must be supported (as when connected devices are
previously configured with IP addresses from multiple address ranges,
and it is not feasible to change the already-defined device IP addresses
and the administrator does not what users to be required to set up a
separate route to each subnet from their workstations)
•
When it is important to hide the addresses of connected devices from
users by the use of
virtual IP addresses
Figure 3-16 shows the fields for configuring a virtual network with DNAT,
which appear on the “Configure Subnets” Wizard screen.
Figure 3-19:
“Configure Subnets” Screen: Virtual Network (DNAT)
Configuration
Summary of Contents for AlterPath OnBoard
