manualshive.com logo in svg

Cyclades AlterPath OnBoard, Administrator'S Manual

Share
Download
Cyclades AlterPath OnBoard Administrator'S Manual Download Page 76

Message Logging (With Syslog) on the OnBoard

 

 

40

AlterPath OnBoard Administrator’s Guide

•

3  -  ERROR

•

4 - WARNING

•

5  -  NOTICE

•

6 - INFO

•

7  -  DEBUG

Syslog Servers

Syslog servers run on operating systems that support system logging services, 
usually UNIX-based servers with the 

syslogd

 configured. 

Before configuring syslogging, the OnBoard administrator must ensure that 
an already-configured syslog server with a public IP address is accessible 
from the OnBoard. The OnBoard administrator must know the IP address of 
the syslog server.

Tasks for Configuring Syslog Messages

The following table lists the tasks related to configuring syslog 
messages and destinations. 

Table 1-17: 

Tasks for Configuring Syslog Messages

Task

Where Documented

Specify one or more syslog servers, optional 
additional destinations for syslog messages, 
and configure message filtering

“To Configure the Syslog Destination and 
Message Filtering” on page 221

Specify sensor alarms to be sent as syslog 
messages

“To Begin Configuring a Sensor Alarm” 
on page 202

Specify overcurrent alerts to be sent as syslog 
messages

“To Enable Overcurrent Protection for an 
AlterPath PM IPDU” on page 135

Summary of Contents for AlterPath OnBoard













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands