manualshive.com logo in svg

Cyclades AlterPath OnBoard, Administrator'S Manual

Share
Download
Cyclades AlterPath OnBoard Administrator'S Manual Download Page 247

Web Manager "Config" Menu Options 

211

 

 

Configuring SNMP

Configuring SNMP Information Settings

Under the “OnBoard information settings” heading on the Config 

→

 SNMP 

screen shown in Figure 6-31, clicking the “Edit” button enables the 
administrative user to change the configured values. The “Edit” button brings 
up the screen shown in the following figure.

Figure 6-32:

Config 

→

 SNMP: Edit OnBoard Information Settings

T

To Configure OnBoard SNMP Information

1.

Log into the Web Manager as an administrative user.

2.

 Go to Config 

→ 

SNMP

.

3.

Click the “Edit” button next to the SysContact and SysLocation entries.

4.

Accept or change the text in the “Contact” field.

5.

Accept or change the location in the “Location” field.

6.

Click OK.

7.

Click “Save and apply changes.” 

Summary of Contents for AlterPath OnBoard













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands