Cyclades AlterPath OnBoard, Administrator'S Manual

Page: 144 / 460

Configuring Regular Users —Wizard
108 AlterPath OnBoard Administrator’s Guide
T
To Create and Authorize a User for Device
Management—Wizard
1. Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager” on page 75, if needed.
2. Click the “Wizard” button.
3. Click the “Add a regular user” option in the left menu bar.
4. Enter a name in the “Username” field.
5. Enter identifying (GECOS-type) information in the “Full name” field.
6. Enter a password in the “Password” field.
7. Enter the password again in the “Retype password” field.
Full name Administratively-defined name to
identify the user.
Password Password used for accessing the
OnBoard.
Retype Password As stated.
• Sensors
• Event log
• Device
Console
• Power
• Service Processor
Console
• Native IP
Check any of the checkboxes to allow
the user to perform the selected device
management actions
PPP/PPTP access • None
• PPP (dialup only)
• PPTP (VPN only)
• PPP (dialup) and PPTP
(VPN)
Selecting PPP or PPTP for the user
causes the two additional fields to
display for setting the PPP or PPTP
password, as shown in the following
screen example:
Table 3-7: User Configuration Settings (Continued)
Settings Notes