![background image](http://html1.mh-extra.com/html/cybex/790t/790t_owners-manual_2703712040.webp)
Cybex Owner’s Manual
40
Auto Program (ATSC Monitor)
1.
Tap ▼ to select
Auto Program
.
2.
Tap ► to enter the menu.
3.
Tap ▲ or ▼ to select
Mode
.
ATSC Monitor
Auto Program
■ Mode
Analog Only
■
Channel Sequence
Interleave A + D
■
Additional Digital Signal
None
■ Channel Map
Programmed ►
Position: ▲ ▼
Exit: SETUP
Next: ◄ ►
4.
Tap ◄ or ► to set the scope of channel scanning.
•
Analog Only (Default): TV searches for analog channels only.
•
Digital Only: TV searches for digital channels only.
•
Analog and Digital: TV searches for both analog and digital channels.
5.
Tap ▼ to select
Channel Sequence
.
6.
Tap ◄ or ► to set the Channel Sequence in which the channels are displayed after searching.
•
Interleave A+D: In the order of channel number regardless of the system.
•
All A then D: Digital channels are displayed after all analog channels.
7.
Tap ▲ or ▼ to select
Additional Digital Signal
. Not available when
Mode
is set to Analog
Only.
8.
Tap ◄ or ► to choose the
Additional Digital Signal
source. Choices are: None, Air, Cable
STD, Cable IRC, or Cable HRC.
9.
Tap ▼ to select
Channel Map
.
10.
Tap ► to start auto programming. A confirmation menu will appear before proceeding.
11.
Tap ▲(Yes) to start auto programming. Tap ▼(No) button to cancel the operation. The TV
will now search all available channels with an on-screen progress percentage displayed.
Any tuning Mode that includes Digital channels will require several minutes to complete auto
programming.
This may take 20 or more minutes. If screen shuts off, tap the
icon to turn monitor on.
12.
Tap the
Setup
icon to return to normal TV viewing once auto programming is complete.