Cybex Owner’s Manual
5
Important Safety Instructions
(Save These Instructions)
WARNING: Shock and electrocution hazard.
•
Unplug unit and let sit 10 minutes before cleaning or performing maintenance.
•
Electrical charge can remain in unit after unplugging.
•
Keep water and liquids away from electrical parts.
User Safety Precautions
Prior to use:
• Obtain a medical exam before beginning any exercise program.
• Obtain instruction before using.
•
Read and understand warning labels.
• Read and understand emergency stop procedures.
• Maximum user weight is 400 lbs. (180 kg).
• Inspect unit. If damaged, notify floor staff. DO NOT USE.
• Place your feet on the two top steps when starting or stopping the treadmill.
• Clip E-STOP lanyard to clothing.
• Do not remove this label. Replace if damaged or illegible.
During use:
• Do not use for stretching and do not attach straps or other devices.
• Do not allow children 12 or younger to be on or near machine.
• Stop exercise if feeling faint, dizzy, or have pain.
• Use the handrails for support and to maintain balance.
• Keep all body parts, clothing, and accesories, clear of moving parts.
• Wait until running belt comes to a complete stop before getting off.
Facility Safety Precautions
It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is
performed.
•
Enforce all user and safety precautions.
•
Read and understand the Owner’s Manual completely before assembling, servicing or using unit.
•
Verify all users are properly trained on using the equipment.
•
Do not use unit outdoors.
•
Verify that each unit is setup, leveled and operated on a solid level surface. Do not install
equipment on an uneven surface. Do not operate in recessed areas or on plush carpet.
•
Verify there is enough room for safe access and operation of unit.
•
Instruct all users on how to clip the e-stop clip onto their clothing and carefully test it prior to using
the treadmill.
•
Instruct all users to use caution when mounting and dismounting the treadmill.
•
Use a dedicated line when operating the treadmill. A dedicated line requires one circuit breaker per
unit.
•
Connect the treadmill to a properly grounded outlet only.
•
DO NOT operate electrically powered treadmills in damp or wet locations.
