Cybex Owner’s Manual
33
5.
Press
Scan
to scan for available channels. The scan can take up to 10 seconds and then
display “TV-1 of #”. The “#” symbol is total number of strong UHF channels found. Some of
these channels may not be signals from the TV transmitters and need to be deleted.
Review channels
1.
Tap
Up
or
Down
to listen to available channels with the headphones.
2.
Delete unwanted channels by pressing
Delete
to delete channel. Repeat process for additional
unwanted channels.
3.
Adjust the Near/Far setting for channels that are available but not showing. Press
Far
to
change the setting from “FAR” to “NEAR”. Press
Scan
to re-scan for available channels.
4.
Tap
Up
or
Down
to scroll through and verify all TV channels. If all TV transmitters
are stored, and they all correlate the TV number to the correct TV heard, setup is complete.
If not you may need to re-scan or adjust the transmitter codes (see documentation for your
transmitters to perform a code change.)
5.
Tap
Toolbox
then
Home
to exit setup.Transmitter setup complete.
6.
Proceed to
Add FM Radio Stations (optional)
.
Setup TV FM Transmitters
If your TV’s use FM transmitters, follow these instructions to assign a TV channel to each frequency.
1.
Tap
Setup
at the main
Toolbox
screen.
2.
Tap
Scroll Right
to navigate to the
A/V Config
icon.
3.
Tap
A/V Config
to enter
TV Configuration
.
4.
Tap
Select Xmtr
to select your transmitter type as “TV FM”.
