![background image](http://html1.mh-extra.com/html/cybex/790t/790t_owners-manual_2703712028.webp)
Cybex Owner’s Manual
28
Setup
Use the following instructions to setup the unit.
WARNING: Falling hazard.
When starting unit
•
Stand on two top steps.
•
Do not stand on belt.
Cybex recommends that the treadmill be unplugged or the on/off (I/O) power switch turned off (O)
when it is not in use.
1.
Without anyone on the treadmill, plug the power cord into a power outlet from a grounded,
dedicated circuit as described under Electrical Requirements in this chapter.
Ensure the power cord is not being pinched under the front of the treadmill.
2.
Locate the on/off (I/O) power switch under the front end of the treadmill. Toggle it to the on
position (I).
3.
The control panel will light up.
Initial setup
Initial setup only occurs during the installation of the unit. Once complete, refer to Setup Options
below.
CYBEX
LOGO
Press and hold Cybex logo for 6 seconds to access
Screen
Lock
and
Toolbox
. See Preventive Maintenance section.
ENGLISH
LANGUAGE
ICON
Press and hold language logo for 6 seconds to access
Screen Lock
and
Toolbox
.
1.
Press the Access Toolbox icon to display the
Access to Toolbox
login screen.
2.
Enter the sequence:
.
3.
Press the Setup icon to display the
setup
menu
.
4.
Tap the
Time
icon to advance to the
Set the Time
screen.
5.
Adjust the time if needed, then tap the
ENTER
icon
.
6.
Tap the
Date
icon to advance to the
Set the Date
screen.
7.
Adjust the date if needed, then tap the
ENTER
icon
.
8.
Tap the
Units & Power
icon to select the Set units preference screen.