Cybex Owner’s Manual
46
Operation
Terms Used
This section lists some of the common terms and symbols used in this chapter. Other terms and
symbols are listed in this chapter as appropriate. For setup options see Setup in the Assembly and
Setup chapter.
Active Mode
—
Active Mode
is when the running belt is moving. Before
Active Mode
begins, a three
second countdown and “3...2...1” is displayed.
Active Mode
continues until the preset time limit is
reached, the e-stop key is pulled out or the
STOP
key is pressed.
CardioTouch Screen
—
The
CardioTouch Screen
is the touch screen located in the handset area.
Cool Down
—
A reduction of work load for a short duration allows user to gently reduce heart rate.
Cool Down occurs two minutes prior to completion of the workout-controlled workout sessions.
Dormant Mode
—
Occurs when unit is plugged in and not in use.
Manual Mode
—
In this active mode the user sets a goal for Time. The user controls speed and
incline. Manual Mode continues until the goal is reached. Manual Mode is only available during Active
Mode.
Pause Mode
—
Occurs only if the Pause feature is enabled and user selects the
STOP
key from
Active Mode.
Quick Start
—
This begins by tapping the
Quick Start
icon.
Quick Start
enters
Active Mode
at
minimum speed and 0% elevation
with time counting up from 0:00.
Workout Review
—
Review of the accumulated workout data will happen at the end of each workout
session.