Cumberland EXPERT 64 Plus, User Manual

Page: 11 / 76

11
EXPERT 64+, rev.12
EXPERT 64+
4. CONTROLLER SETUP
4.1. Time & Date
1. Select:
» 12. Setup
»
8. Time and Date
Time and Date
Wed Aug 27 20XX
7 : 07 : 07 PM
2. Press the
Enter/Modify
button then use the
up and down- arrow keys to set the current
day of the week.
3. Press the Enter/Modify button to step to
the next item then use the up and down-arrow
keys to set the selected item.
4. Proceed in similar fashion to set the whole
time and date.
4.2. Password
This function allows identifying 2 different
types of users. The password is made up of
4 digits and it is used to restrict access to
certain functions of the controller. When a
correct password is entered, the current user
is identified.
Installer Password (default = 0-6-1-0)
The installer mode gives full access to all the
controller functions. The installer password
can be modified as explained below.
User Password (default = 1-1-1-1 & 2-2-2-2)
The user mode gives access to the basic
functions of the controller. The controller
automatically returns to the user mode after
15 minutes of inactivity. The user passwords
cannot be modified.
1. Select:
» 12. Setup
»
4. Password
Password
Current User Installer
Change User * * * *
Change Password * * * *
Confirm Password * * * *
Entering a password: Press the Enter/Modify
button then use the up and down- arrow keys
to enter the first digit of the password. Press
the Enter/Modify button once again to step to
the next digit.
Enter the 4 digits of the password then press
the Enter/Modify button once again to validate.
The user is then identified. The message
“Invalid password” is displayed if a wrong
password is entered.
2. Changing the installer password: The
installer password must first be entered as
shown above to be modified. The message
“Change Password”
is displayed when the cur-
rent user is identified as the Installer. The new
installer password can then be entered.