CUBICON Single Plus
User Manual
8
Heating bed
cleaning
General cleaning is conducted by cleaning surface contaminants with scraper, dry cotton
cloth.
* Damaged lamination of heating bed, caused by regular use, is excluded from
complimentary A/S.
Cleaning shall be conducted with only high-purity acetone in the case of serious
contamination.
* Do not use general cleanser (wet tissue) for cleaning as it may contain substances, which
may cause bed lamination damage.
Auto tilt
Nozzle touch process in section of level contact point shall be inspected in the case of error
occurrence of auto tilt process. And heating bed contact point and cleaning the end of nozzle
(steel brush is recommended for cleaning). Inspection/repair by A/S center is required in the
case of continuous error.
Preparation of AS
requirement
In the case of any problem occurrence, user shall take a photo or video of problematic file
and problem situation, inside printer, LCD display etc. for inspection/repair.
