CUBICON Single Plus
User Manual
46
11-2. Extruder maintenance
Nozzle of the extruder is located at the bottom of the extruder and it is the part, which makes model as
filament melts and comes out.
Nozzle is the consumable part of the printer and can be worn out or filament carbonization leftover, impurities
of filament might be piled up inside due to continuous nozzle use. Therefore regular nozzle replacement is
required. However, in the case of improper nozzle control, several problems related to the nozzle can occur
earlier than normal nozzle use period and it may cause poor printing quality. In the case of serious printing
quality problem occurrence, the nozzle cover might be blocked and it requires the nozzle replacement.
Regular nozzle cleaning is required for the nozzle continuous use with uniform printing quality.
(1)
Cleaning gear contaminants
Turn off the printer power and pull out G_FAN from the extruder rear side.
Be mindful that damage might
occur in the cable pull out process.
