CUBICON Single Plus
User Manual
24
Saving and printing
① Select ‘Utilities’ button and go to ‘File manager’. Select
USB memory and select clip.hfb file and copy it.
②Press the printer icon again and select file icon. Select
copied clip.hfb file, which is suitable to installed filament
and print it out.
* In the case of direct printing method, copy is made to inside memory but unlike saving and
printing method, once you print next file, previous file will be deleted automatically. Make sure to
save the file and print it out, if you want to save the file to inside memory.
9.
Network
In order to print with Cubicon single Plus, make sure to save sliced file to USB memory and insert the printer
USB to slot and print the saved file or printing can conducted by connecting PC and USB cable or WIFI. This
section explains about USB cable connection and WIFI connection. (In order to print through a network, over
Cubicreator v3.1* version shall be used.) Once printing starts in Network connection printing process, (after
slicing date transmission to the printer is completed.) normal printing can be processed, even if Network
breaks.
* WPA2PSK security setting for a router is recommended. Other security level are not guaranteed.
* Connection error may occur in the case of SSID includes korean letter, special characters, chinese
characters etc.
* WIFI connection shall be directed to router installation spot antena. Connection property may be
different, depending on a router.
* Printing shall be proceeded after transmitting slcing date form PC in order to print through WIFI
connection. Transmission failure may occur in the case of unstable connection. USB memory use is
recommended if the slicing data is big.
