CUBICON Single Plus
User Manual
11
(2) Cubicon single plus extruder
[1] Extruder part
Spills filament and melts it and sends to nozzle
[2] Heating bed
Is printing platform of output in the printing process.
[E1] Filament insert hole
Is the hole which puts filament into extruder. A Teflon tube is placed inside it.
[E2] Filament press handle
Is the handle, which manually takes out filament from inside extruder and is pressed
in the inserting process
[E3] Formative LED
Is the white LED to check the model status, and is located in detachable extruder
part.
[E4] Wind guide
Is the tool, which blows modeling fan wind to a model side and is located in
detachable extruder part.
[E5] Nozzle
Melts and comes out from filament.
[E6] Removable setscrew
Is used for detachable extruder part separation.
[E7]Fixture extruder part
Is fixture part of extruder.
[E8] Detachable extruder part
Is removable part of extruder.
1
2
E4
E2
E6
E7
E8
E3
E1
E5
