CUBICON Single Plus
User Manual
45
(2)
Attaching
Attaching is basically in
reverse order of detaching
.
Make sure to attach the extruder after inserting it to fixture part and tighten knob in clockwise direction, once
you can hear
clicker
after hole, which is put on shaped fan of rear extruder, is engaged. Do not put the knob
with force as accurate combination is required. Instead, proceed attaching process again.
*
Make sure to turn off the printer power to separate/install the detachable extruder
, proceed the work
after temperature of extruder nozzle is completely cooled off.
*
. Mind possible scalding if the removable extuder separation/installation is
unavoidable
in high nozzle
temperature condition.
* Make sure not to install / separate detachable extruder with extreme force as it may cause the extruder
part damage.
* Printing in the case of detachable extruder is not properly installed to fixture part or removable
setscrew is not tightened condition, may cause problem of the extruder installation or malfunction
which make printing impossible.
Make sure to install the extruder properly in prior to using the printer.
* Make sure not to touch the extruder part or cause shock with wet hand as the extruder includes electric
equipment.
①
②
