CUBICON Single Plus
User Manual
10
4-2. Product parts name
(1) Cubicon single plus body
[1] Top door
Is used for filament replacement, detachable extruder separation and
maintenance/repair.
[2] Front door
Is used to pull out the model part
[3] Level
Is used for horizontality inspection in the printer installation process
[4] Bottom door
Is used for floor cleaning
[5] Clean filter case
Is input to clean filter.
[6] USB memory insert hole
Is inserted to USB memory.
[7] Touch LCD and Reset
Is used for urgent stop of touch LCD and printer.
[8] Filament insert hole
Is used to supply filament.
[9] Spool door
Is used for filament spool fixation
[10] Spool door handle
Is used to lock the spool door (make sure to lock the door after spool installation)
[11] Spool carrier
Is filament spool installation place
[12] USB input
Is the input socket (Type-B) for PC and USB connective cable
[13] Power switch
Is the main power switch of the printer
[14] Power input
Is the connective socket of printer power.
[15] Rubber feet
Is used to prevent the printer sliding(four spot on a floor)
2
3
4
5
6
7
10
11
8
9
1
12
13
14
15
