CUBICON Single Plus
User Manual
21
7-2. Unloading
Select ‘Filament’ from the main menu.
Press ‘Unloading’ button, once you select ‘Filament’ to unload.
Press ‘Start’ button, once temperature reach target temperature.
Press handle and take out the filament, once you see an icon on LCD screen, which indicates the filament
takeout pressing handle.
* Do not touch nozzle part as not only nozzle but melting filament, once the nozzle temperature of
the extruder goes up.
* Make sure to take out the filament by pressing handle.
* Make sure to prevent possible malfunction as melted filament end part may get caught inside
extruder.
*The filament might get caught inside the extruder in unloading process as filaments’ end part are
different from each other by their type.
Do not pull out the filament forcefully with your hand, in the case of possible caught inor difficulty of
the filament pull out.
1) unloading by pushing the filament into the nozzle and correcting it through melting the filament
end piece or
2) Separate detachable extruder and remove the filament after cutting out the filament of outside
extruder. Forcible filament pull out may cause the filament (leftover) caught in of inside the
extruder and it may lead to fixed extruder part repair.
