CUBICON Single Plus
User Manual
57
Connection interruption may occur depending on a wireless router model.
Try to initialize the printer setting or turn OFF and ON the printer power.
Refer to 22P for detailed information.
5) Filament cannot be extruded with the nozzle.
Check if the filament is a genuine product. Some filaments have different temperature condition from
other genuine filaments and problem may occur in extruding process due to those filaments’ serious
temperature change. Serious temperature change may lead to the extruder malfunction.
The printer
malfunction due to non-geniune filament use is excluded from complimentary A/S.
Check if the filament supply is normal. Untie and rearrange the filament in the case of problems such as
the filament twisting in a spool or untied filament. It is highly recommended to untie and rearrange
filament as twisted or untied filament may cause continuous problem.
The filament nature may change from its original nature due to pollution such as humidity or dust. Such
filament use may cause malfunction such as extruder blockage. Use opened filament as soon as
possible and keep the filament in fixed condition in the spool using plastic to prevent the filament from
humidity/dust. Make sure to keep the filament only for short period.
Check if supplied filament is not too thick or not too thin either. The filament in 1.6~1.9mm diameter
shall be used for accurate filament supply in Cubicon Single Plus. Using too thin or thick filament may
be inserted to equipment and it may lead to equipment malfunction.
In the case of inside extruder filament gets twisted or caught in equipment, extruding cannot be
processed due to extruding problem. Make sure to separate detachable extruder and remove
problematic filament. Inside extruder twisting problem may easily occur in the case of filament of low
printing temperature. Twisting problem can be solved by adjusting inside equipment temperature to low
degree.
Check if detachable extruder installation is proper. Error message may occur on LCD screen in the case
of problem occurrence.
Check if filament in use and the printer extruder temperature are proper.
Replace damaged nozzle. The nozzle is consumable product and can be replaced through A/S.
6) A model is not attached to a floor (heating bed) and is detaching.
Check if filament is genuine product. Some filaments are not glued to the manufacturer’s heating bed
and it may cause equipment malfunction in printing process.
The filament nature may change from its original nature due to pollution such as humidity or dust. Those
polluted filaments may be glued to the heating bed poorly. Use opened filament as soon as possible
and keep the filament in fixed condition in the spool using plastic to prevent the filament from
humidity/dust. Make sure to keep the filament only for short period.
Remove contaminants from heating bed. General wet tissues may cause damage to heating bed
lamination. Never use wet tissues for heating bed.
Check if filament in use and heating bed, extruder temperature condition are proper. The heating bed
use in Cubicon Single Plus can be glued well if only it can maintain proper temperature condition with
filament in use. And the temperature condition can be different depending on printing environment.
Check if the heating bed attachable area is not too small or formed floor is not irregular. Use a floor
supportive material option in the G-Code formation process or slow down the first layer printing speed
to solve the problem.
Use proper tape if required. Applying special heat resisting tape such as kapton tape to heating bed in
accordance with formed model or filament type, might be helpful for a model attachment. Corner
