CUBICON Single Plus
User Manual
49
Make sure to remove the filament with tweezers, which is inserted to filament entrance of detachable extruder
(3)
Inside nozzle cleaning
Cleaning inside nozzle is basically possible with filament loading. Clean the inside with nozzle control pin in
the case of loading is impossible due to change of inside filament property caused by materials mix. Make
sure not to push in forcefully as it may cause damage to inside.
* Make sure to wear gloves as inside nozzle cleaning is proceeded in hot condition and be mindful of
possible scalding
* Make sure to work holding only plastic part of detachable extruder in hot condition. Metal part and
rubber part are in hot condition.
* Nozzle control pin is not required to be used often if it does not mix material.
