CUBICON Single Plus
User Manual
12
5.
Installation and printing preparation
5-1. Unpacking
① Take out the product from plastic packing.
② Move the product to installation spot.
* Considering volume and weight of the printer, at least two persons shall handle the printer.
* Release the printer from plastic packing and then take out only the printer without plastic packing as plastic
material may slip in the process of taking out.
③ Open the front door and take out inside packing
material, accessories and check out if any material is
missing.
④ Open the top door and take out extruder fixture packing material.
Make
sure not to break the extruder driving cable or a Teflon.
* The driving part is fixed only with packing material without using cable tie to prevent potential problems when
the printer is operating with it. Please, be cafeful not to damage the part when removing the internal packing
material.
