CTC Union EcoZenith i555 Pro 1x230V, Installation And Maintenance Manual

Page: 96 / 168

96 CTC EcoZenith i555 Pro
7.10.5.7 Def. Pool
Pool No (Yes/No)
Select "Yes" to connect the pool if circulation pumps
(G50) and (G51) and pool sensor (B50) are connected to
the system.
Block pool ext. config. NO (None/NC/NO)
This menu bar is displayed if an "Input" for remote
control is defined for the "Block Pool" function in the
"Installer/Define/Remote Control" menu.
This menu defines the Normally Open (NO) or Normally
Closed (NC) mode for the external control signal when
remotely controlling the function.
For examples of normal mode settings, refer to the
"Def. Remote Control" section of the "Installer / Define”
chapter.
7.10.6 Def. Ventilation/EcoVent
Ventilation Yes (EcoVent/No)
This defines whether the EcoVent ventilation product is
to be connected to the system.
The menus below define the Normally Open (NO) or
Normally Closed (NC) mode for the external control
signal when remotely controlling the function. This menu
bar is displayed for the functions for which an "Input" for
remote control is defined.
Vent. red. ext. config. None (None/NC/NO)
Setting for the "Reduced" ventilation mode.
Vent. norm. ext. config. None (None/NC/NO)
Setting for the "Normal" ventilation mode.
Vent. forc. ext. config None (None/NC/NO)
Setting for the "Forced" ventilation mode.
Vent. cust. ext. config. None (None/NC/NO)
Setting for the "Custom" ventilation mode.
For examples of normal mode settings, refer to the
"Def. Remote Control" section of the "Installer / Define”
chapter.
Refer also to the "Installation and Maintenance Manual"
for CTC EcoVent.
Menu: "Installer / Define / Pool".
Menu: "Installer/Define/Ventilation".