![CTC Union EcoZenith i555 Pro 1x230V Installation And Maintenance Manual Download Page 91](http://html.mh-extra.com/html/ctc-union/ecozenith-i555-pro-1x230v/ecozenith-i555-pro-1x230v_installation-and-maintenance-manual_2693358091.webp)
91
CTC EcoZenith i555 Pro
7.10.2
Def. Heating Circuit
Heating circuit 1-*
Heating Circuit 1 (HC1) is predefined by CTC EcoZenith.
The rows under Heating Circuit 1 show the other
definable heating circuits (HC2-3 in the example).
The heating circuits shown depend, among other things,
on which heating circuits are part of the defined System
Type (1-6).
Room sensor
Yes (Yes/No)
Select "Yes" if room sensors should be connected to the
heating circuit.
Type
Wireless (Cable/Wireless/SmartControl)
Select whether the room sensor for the heating circuit
has a wired (via cable) or wireless connection.
•
Wireless
Select "Wireless" to connect CTC’s wireless room
sensors to the heating circuit.
Refer to the "CTC Wireless Room Sensor" manual
for information on how to connect these sensors.
•
SmartControl
SmartControl is a separate series of wireless
accessories. If "SmartControl" is selected, the
connection channel must be selected in the row
below. SmartControl accessories are connected to
the system via the "Installer/Define/SmartControl"
menu. Refer to the separate SmartControl
Accessories manual.
HC Night reduction ext. config.
None (None/NO/NC)
This menu defines the Normally Open (NO) or Normally
Closed (NC) mode for the external control signal when
remotely controlling the function.
For examples of how to set the normal mode, refer to
the "Installer/Define/Remote Control" chapter.
HC Heating mode ext. config.
None (None/NO/NC)
This menu defines the Normally Open (NO) or Normally
Closed (NC) mode for the external control signal when
remotely controlling the function.
For examples of how to set the normal mode, refer to
the "Installer/Define/Remote Control" chapter.
Menu: "Installer/Define/Heating Circuit".
Select a heating circuit and press "OK" to access the settings.
Menu: "Installer/Define/Heating Circuit/ Heating Circuit 1".
Wireless room sensor selected.
*CTC EcoZenith i555 can control up to 3 CTC heat pumps and 3 heating circuits simultaneously.
Summary of Contents for EcoZenith i555 Pro 1x230V
