CTC Union EcoZenith i555 Pro 1x230V, Installation And Maintenance Manual

Page: 79 / 168

79
CTC EcoZenith i555 Pro
Menu: "Installer/Settings/SmartGrid schedule".
Menu: "Installer/Settings/Current Sensors".
7.9.14 Settings Ventilation/EcoVent
Settings for the CTC EcoVent ventilation product are
made here.
For more information, see the "Installation and
Maintenance Manual" for CTC EcoVent.
7.9.15 Settings Current sensor
These menu bars are displayed if "Current Sensor" is
defined in the "Installer/Define Current Sensor" menu.
In the menu, specify the phases (L1, L2 and L3) to
which the current sensors have been connected.
In the lower left corner of the screen, "Invalid
configuration" will be displayed until L1, L2, and L3 are
paired with the three current sensors in the menu.
7.9.16 Settings Round circulation
schedule
Round circulation is equipment which an electricity
supplier can fit in order to disconnect, for a short period
of time, equipment which draws high current. The
compressor and electrical output are blocked when
Round circulation is active.
This menu bar is displayed if a weekly program has
been defined for the "Round circulation" function.
The "Round circulation" function can also be controlled
remotely by activating the "Input" defined for the
function.
For more information, refer to:
• chapter "Weekly Program" for schedule setting.
• section "Def. Remote Control" of the
"Installer / Define” chapter for defining the remote
control function.
7.9.17 Settings SmartGrid schedule
This menu is used to schedule the weekday periods
during which the "SmartGrid" functions should be
active. This schedule is repeated every week.
"SmartGrid" can be used to block a function ("SG
Block") or to achieve a temperature increase during
periods when the energy price is low ("SG Low") or ("SG
Overcapacity").
The "SmartGrid schedule" menu bar is displayed if a
weekly program has been defined in the "SmartGrid A"
row.
For more information, refer to:
• chapter "Weekly Program" for schedule setting.
• chapter "Installer/Define/Remote Control" for
defining SmartGrid.