manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 99 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 99

99

4.4 

Configuring I-Test Test Sequence

This functionality allows the user to define the test, or the sequence of tests that I-Test will undertake 

in normal operation.

This selection will define the test or sequence of tests I-Test will undertake when a gas monitor is 

inserted and the door closed. This sequence will be fully automated by the I-Test.

I-Test can be configured via the front panel key pad to undertake the following tests:

•  Speedy bump (see 

page 100

)

•  Smart bump (see 

page 101

)

•  Calibration (see 

page 102

)

•  Download Monitor log Files (see 

page 104

)

To manually carry out a test and/or a calibration on a gas monitor mounted in the I-Test, proceed 

as follows:

 

X

Access the Main menu (see 

page 93

).

 

X

From the Main menu use the arrow keys to highlight the Enable Test Stages icon 

À

.

 

X

Press the 

OK

 key. The Enable Test Stages screen 

Á

 will be displayed.

 

X

Use the 

 and 

 keys to highlight the Test icon 

Â

 and press 

OK

. The Tests screen will be 

displayed 

Ã

.

Note: Smart bump functionality is only applicable to Gas-Pro, a T4 I-Test test screen will not display 

the smart bump icon 

.

Figure 80: Test Sequence Screen Selection

To select a test use the arrow keys to navigate to the required icon then press 

OK

 to highlight the icon.

A box will now appear around the icon indicating this function has been selected this test will be 

performed if a gas monitor is inserted into the I-Test.

If the 

OK

 button is pressed again this will deselect the icon and the function will no longer be 

selected and will not be performed if a gas monitor is inserted into the I-Test.

Â

À

Á

Ã

OK

OK

13 May 2013 11:30:45

13 May 2013 11:30:45

I-Test

I-Test

13 May 2013 11:30:45

I-Test

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments