manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 39 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 39

39

3.7.3.5 Protection

This screen enables the current PIN code to be verified and/or a new one set. The factory default 

PIN code is set to 000000.

This PIN code is entered via the front panel to gain access to the main menu, see 

Section 4.2 

on

 

page 93

.

 i

This option is only available if I-Test Manager is directly connected to I-Test via the USB port.

Figure 23: Protection screen

 

X

To verify the current PIN, key it in to the 

PIN:

 field and click 

Verify PIN

. If the PIN code is correct, 

Pin matched

 will be displayed. If incorrect, 

No match

 will be displayed.

 

X

To change the PIN code, key the required code into the 

New PIN:

 field and click 

Set New PIN

. 

The message 

Pin set ok

 will be displayed.

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments