46
Alarm One:
Activate this tick box to change the alarm level one settings of a specific sensor.
Threshold:
Enter the required gas level that will trigger alarm level one in the
gas monitor.
Direction:
Activate this tick box and then set the direction in which monitored
gas should be changing in order to trigger the monitor into the Alarm one state.
Latching:
Activate this tick box and then set this field to either Non-Latching,
Latched or Latch Accept (only available for Gas-Pro configurations). Please
see Gas-Pro and T4 User & Operator manuals for further details.
Alarm Two:
Activate this tick box to change the alarm level two settings of a specific
sensor.
Threshold:
Enter the required gas level that will trigger alarm level two in the
gas monitor.
Direction:
Activate this tick box and then set the direction in which monitored
gas should be changing in order to trigger the monitor into the Alarm two state.
i
Once I-Test has been configured to apply a sensor field configuration file, it will continue
to do this to each and every monitor inserted into I-Test. If it is required to stop the
configuration update it is necessary to deselect the ‘Apply Changes On’ tick box for each
sensor and save this configuration to I-Test.
Contents
Exit
Unpacking
Set-up
Operating I-Test
I-Test
Manager
Configuring
I-Test
Warranty
Overview
Contacts
Appendices
Troubleshooting
Specification