manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 25 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 25

25

3.6 Language selection

If necessary, select your preferred language from the 

Select the language

 drop down list in the 

centre of the screen.

I-Test Manager is now fully installed and ready to use.

3.7 

Initial Configuration of I-Test 

This section details how to configure and setup I-Test for initial use. This section steps through each 

stage required to fully configure I-Test prior to saving this configuration.

3.7.1 Manage cylinders

Prior to configuration of I-Test and assigning a cylinder to the inlet of I-Test, the cylinder profile must 

first be defined. 

I-Test can configure a number of cylinder profiles for potential connection to a gas inlet. These 

profiles are detailed in Appendix A.

I-Test Manager will prevent any combination of cylinder being created other than those listed in 

Appendix A.

To create or alter a cylinder profile, proceed as follows:

 

X

Select 

Manage cylinders

 from the Home page. The 

Manage cylinders

 dialogue box will be 

displayed (see below).

Figure 15: Manage cylinders dialogue box

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments