manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 86 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 86

86

3.12.3.1 Monitor Status

These settings control the gas monitors that will appear in the exception report produced.

This function allows instruments to be removed from the exceptions reports, this may be necessary 

if for example  instruments are lost or damaged and will prevent instruments not required being 

continually reported as not been bump tested or calibrated.

 

X

Select 

Monitor Status

 and the following screen will be displayed:

Figure 66: Monitor Status

This will show a status summary of all gas monitors listed by serial number.

This list of serial numbers represents all instruments that if meeting the requirements of the 

exception reporting settings will appear in the exception report.

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments