65
X
To zoom in on the data, click and drag a box over the required data area.
i
This will only zoom the x-axis; the y-axes must be zoomed using the axis controls area.
Entering a value in any of the text boxes will adjust the graph immediately with your new
values. Alternatively you may use the buttons in the axis controls area to zoom.
X
To reset an axis, use the reset x / % / ppm buttons. This will effectively undo all zoom operations
so all data can be viewed.
X
To create a ‘comma separated value’ (CSV) file of the event data, click the
Export to CSV
button,
name the file, navigate to the required destination and save it to disk.
For a full explanation of the data log screen, see
Appendix B: Graph Function Explained
on
3.10.2.3 Date From/To
This option allows the user to select by date the gas monitor log files to be shown, these can then be
selected to view in the graphing function.
X
Enter the required
Date From
and
To
by changing each value in the field or clicking the calendar
button to the right of the field.
i
The field will be highlighted yellow to indicate a reduced set of available data is being
displayed.
3.10.2.4 Serial From/to
This option allows the user to select by serial number the gas monitor log files to be shown that can
then be selected to view in the graphing function.
X
Enter the required
Serial From
and
To
by changing each value in the field.
i
The field will be highlighted yellow to indicate a reduced set of available data is being
displayed.
Contents
Exit
Unpacking
Set-up
Operating I-Test
I-Test
Manager
Configuring
I-Test
Warranty
Overview
Contacts
Appendices
Troubleshooting
Specification